Skip to main content

In progress video walk through of the house over-haul!

Since getting the keys to our home 10 weeks ago so many things have changed.  At one point the house literally looked like a building site!  Walls were knocked back to bare plaster, dado rails ripped out, doors removed, carpets torn up, fixtures and fittings gutted and the cloakroom suite completely ripped out.

Thankfully we are now on the final stretch (under 6 weeks until we hopefully move in!) and I wanted to do a video walk through to document just how far we have come in our renovation journey.  In hindsight, shooting in landscape would have been a much better idea, but sorry folks you'll just have to put up with the scaled down view!


If you can't remember the condition of the house when we moved in, I featured it in a blog post here :)

Our home is definitely one built from love as it is thanks to amazing parents, friends and family that we have achieved so very much.  The Mr and I have sadly had minimal input with the physical side of things (joys of ill health for the Mr and pregnancy ailments for me!) but we are so very blessed to have such an amazing support network.

As the video says, let me know what you think in the comments!

Comments

Popular posts from this blog

Colour B4 Extra Strength Review - Part Two Using the Dye Remover and helping to prevent re-oxidation

If you haven't already read it, you should really check out Part One of this as it details preparation, it can be found here Well it is done and I am rather impressed with the results, even if I do say so myself!  There were a few things that I did differently this time and I will go through the entire process and then share the finished result. You will need; Sectioning Clips Comb Colour B4 Extra Strength Cling Film Two beanie style hats Hair Dryer Shower Bucket Loads of Patience Step One Start by sectioning your hair and clipping the upper portion to the top of your head.  If like me you have long hair, it is best to start with the underneath layers.  I found the easiest way to apply the remover was to take a small section of hair (no more than an inch wide) and squirt a small amount into my gloved hands and start with the ends carefully rub it in.  I usually applied 3 squirts to each section; end, mid length and root.  Time should be taken to ensure each squ

Superdrug Colour Rewind - Hair Dye Remover Review - Part One

I started dying my hair at the grand old age of 15 - fast forward to 12 years later and my hair has become a dried out mop of horror.  I started with black - I loved Marilyn Manson and Slipknot and needed the world to view my hair as an extension of my sheer awesomeness!  This phase lasted until I was about 19; almost 4 years of the darkest of darks layered over my hair. I alternated between black, black-blue, black-purple and even tried dip dyed black and red.  At 19 I wanted a change and decide to bleach it so I could dye it red - after an initial day of ginger (luckily I was favouring the sporty baseball cap in this period) I switched to a dark red.  Next came a few years of alternating between different shades of red and then various browns. When we started trying for a baby in 2010 I was worried that the constant dying of my hair whilst pregnant could cause development issues - I went to a professional hair dresser and had blonde highlights put through my then dark brown

Replacement Blades for the Silhouette Cameo - UK users

From the moment I purchased my Silhouette Cameo I was in love.  The only way I could justify the cost was to start up a business , the only problem with this was the cost of the blades.  I was getting through a blade every few weeks, at just under £16.00 (including postage) for a single blade it was getting very expensive.  I knew that once business picked up I was going to either have to increase prices (never a good idea for new businesses) or take a big knock in profits.  The only solution I could see was be to try and find a cheaper solution to the blades. I was first made aware of using disposable blades by Ligaya's Creativity Zone .  She had had success with an aluminium (CB09) Blade Holder.  This blog was invaluable for advice on the different angled blades available and suppliers of the CB09 Blade Holder. The only drawbacks were the seller was based in Asia (have been stung for import taxes before, and it is a hefty amount) and there were reports that the holder act