Skip to main content

Wizard of Oz DIY Wine Glass - Dishwasher Safe

So a few weeks ago I stumbled across glitter wine glasses and mugs (read my diy here) I have been wanting to transform a wine glass since I spotted the original pinterest posts, but didn't want to do the stereotypical covered wine glass.

The Wizard of Oz is one of my favourite films, and after posting about it on my shop page I realized that I wasn't alone.  When I posted our latest paper cut, things went a bit crazy!



Inspired by the obvious interest, I went back to pinterest and found this


I was smitten!  I had found a wine glass design that would do my new craft justice!

So following the same steps as the mug tutorial, I covered stem and base in ruby red glitter, and used my silhouette cameo to add a Dorothy vinyl decal and an adorable gingham bow.  I am so in love with the results! <3





Depending on how well my facebook fans receive the pics, I am hoping to do a glass for each of the main characters!  I can't help but think that they would be the most adorable thing ever!



Comments

  1. Where did you get the decals? I've been looking everywhere for decent wine glass decals but to no avail!

    ReplyDelete
    Replies
    1. I made them :) If you would like to purchase one, please send me a message at chibi-chi-designs@hotmail.com

      Delete
    2. Hi Danielle

      I love your blog and just wanted to say thanks for being so inspiring with your posts and sharing all the things you get up to.

      Delete
    3. Aww thank you so much Cassy :) I'm glad to see you enjoy reading it!

      Delete

Post a Comment

Popular posts from this blog

Colour B4 Extra Strength Review - Part Two Using the Dye Remover and helping to prevent re-oxidation

If you haven't already read it, you should really check out Part One of this as it details preparation, it can be found here Well it is done and I am rather impressed with the results, even if I do say so myself!  There were a few things that I did differently this time and I will go through the entire process and then share the finished result. You will need; Sectioning Clips Comb Colour B4 Extra Strength Cling Film Two beanie style hats Hair Dryer Shower Bucket Loads of Patience Step One Start by sectioning your hair and clipping the upper portion to the top of your head.  If like me you have long hair, it is best to start with the underneath layers.  I found the easiest way to apply the remover was to take a small section of hair (no more than an inch wide) and squirt a small amount into my gloved hands and start with the ends carefully rub it in.  I usually applied 3 squirts to each section; end, mid length and root.  Time should be taken to ensure each squ

Superdrug Colour Rewind - Hair Dye Remover Review - Part One

I started dying my hair at the grand old age of 15 - fast forward to 12 years later and my hair has become a dried out mop of horror.  I started with black - I loved Marilyn Manson and Slipknot and needed the world to view my hair as an extension of my sheer awesomeness!  This phase lasted until I was about 19; almost 4 years of the darkest of darks layered over my hair. I alternated between black, black-blue, black-purple and even tried dip dyed black and red.  At 19 I wanted a change and decide to bleach it so I could dye it red - after an initial day of ginger (luckily I was favouring the sporty baseball cap in this period) I switched to a dark red.  Next came a few years of alternating between different shades of red and then various browns. When we started trying for a baby in 2010 I was worried that the constant dying of my hair whilst pregnant could cause development issues - I went to a professional hair dresser and had blonde highlights put through my then dark brown

Replacement Blades for the Silhouette Cameo - UK users

From the moment I purchased my Silhouette Cameo I was in love.  The only way I could justify the cost was to start up a business , the only problem with this was the cost of the blades.  I was getting through a blade every few weeks, at just under £16.00 (including postage) for a single blade it was getting very expensive.  I knew that once business picked up I was going to either have to increase prices (never a good idea for new businesses) or take a big knock in profits.  The only solution I could see was be to try and find a cheaper solution to the blades. I was first made aware of using disposable blades by Ligaya's Creativity Zone .  She had had success with an aluminium (CB09) Blade Holder.  This blog was invaluable for advice on the different angled blades available and suppliers of the CB09 Blade Holder. The only drawbacks were the seller was based in Asia (have been stung for import taxes before, and it is a hefty amount) and there were reports that the holder act